HP OpenView Storage Mirroring Getting Started (359447-001, May 2004)

19
Select either option and click Next to continue.
7. On the Maintenance dialog box, select Remove and click
Next to continue.
8. The installation program is immediately ready to begin
removing the Storage Mirroring files. Click
Remove to
continue.
9. You will be prompted to indicate whether or not you want to
remove the Storage Mirroring security groups. Click Yes to
continue.
10. A message prompt informs you that the uninstall program has
completed successfully. Click OK and reboot the machine, if
prompted.
Storage Mirroring has been removed from your machine.
Removing Storage Mirroring
automatically
Like the Storage Mirroring installation program, you can automate
the removal of Storage Mirroring and use the default settings for
any prompts. Use the following command on the machine where
you want to remove Storage Mirroring. The command must be
typed exactly as displayed below.
msiexec /x {F732639D-0899-11D4-9327-00A02471D5EC} /qn
After the uninstallation is complete, reboot each machine.
NOTE: The Program Maintenance dialog box will appear. If
you do not see this dialog box, you have not
previously installed Storage Mirroring.
NOTE: If you changed the location where the disk queue
files are stored, these directories will not be
removed during the installation. You will need to
manually remove them.