Storage Mirroring Evaluation Guide

29
Just like when you were monitoring the mirror earlier, you can now monitor the verification
process. Notice that the Mirror Status column changes to Verifying while the
verification process occurs. When the verification is complete, HP OpenView Storage
Mirroring will have created a log file for you to review.
3. Wait until your Mirror Status has returned to Idle and then open the file
DTVerify.log located in the HP OpenView Storage Mirroring installation directory on
your source. You will see that all of the files are reported as the same.
4. Modify one of your files on the target and repeat the verification process, but this time,
select Remirror Files to the Target Automatically.
5. Using the visual or third-part verification, confirm the synchronization of the file on the
target.
Completion Time: 2/7/02 17:04:38:271766
Elapsed Time: 121.689167 seconds
Total Directories Compared: 28
Total Directories Missing: 0
Total Files Compared: 2567
Total Files Missing: 0
Total Files Different: 0
Total Files Encrypted: 0
Total Bytes Skipped: 43685920
Total Bytes Compared: 43685920
Total Bytes Missing: 0
Total Bytes Different: 0
----- END OF VERIFICATION -----
NOTE: Since your target file is newer, make sure that Only if Source file is
newer than Target copy is disabled.
View the status of your verification process