HP OpenView Storage Mirroring Getting Started (359447-001, May 2004)

Logging on and off of Storage Mirroring

To ensure protection of your data, Storage Mirroring uses native

operating system security and requires a valid system username and

password. If you do not have a valid system username and password

for a selected machine, you will not be able to configure Storage

Mirroring for that machine.

As you enter DTCL commands, Storage Mirroring automatically

attempts to log on to the source or target machine. You can verify

your access by the resulting message.

! DT_Full_Access—You have administrator rights to the

selected Storage Mirroring machine.

! DT_Monitor_Only_Access—You have monitor rights to

the selected Storage Mirroring machine.

! DT_No_Access—You do not have any rights to the selected

Storage Mirroring machine.

You can also verify your access at the top of the Text Client screen

depending on the commands you have entered and the information

displayed in the upper half of the screen.

If you have monitor access or no access and want to log on as the

administrator, use the

using the

logout command. Both commands are outlined on the

following page.

Storage Mirroring version 4.3

Source Machine: indy Access Level: FULL)

=============================================================

Command: login indy administrator ******** domain_name

=============================================================

User access level set to DT_FULL_ACCESS

>source indy