HP Storage Essentials V5.1 Installation Guide Second Edition (Linux Release) (T4283-96055, November 2006)

Storage Essentials 5.1 Installation Guide 115
If both the managed and unmanaged array are discovered, they need to stay in the same discovery
group. They can be moved to other discovery groups, but they must be moved at the same time.
When discovering the arrays separately, the array that has already been discovered must be in the
Default discovery group.
Discovering HP StorageWorks XP Arrays
You can discover HP StorageWorks XP Arrays by using the following:
• Command View XP
• Command View XP Advanced Edition
• XP Provider
To determine provisioning support for HP StorageWorks Arrays, see Table 5-3 on page 177 and
Table 5-4 on page 179.
IMPORTANT: The Command View XP SMI agent does not return information related to external
storage available to the HP XP storage arrays, including external LDEVs. As a result, that information
is not available in the management server user interface or reports.
Discovering HP XP Arrays by Using Command View XP
To discover HP StorageWorks XP arrays by using Command View XP, you must enter the following
information for the instance of the HP CIMOM used to manage the storage system:
• user name and password used for accessing the HP CIMOM
• IP address of the server containing the HP CIMOM
HP StorageWorks Command View XP should be installed on a server before you discover an HP XP
storage system.
Discovery from HP SIM by Using Command View XP
To discover HP storage systems by using Command View XP, provide the following information in HP
Insight Manager:
• IP address or system name of the HP CIMOM you want to discover. See ”Adding an IP Range
for Scanning” on page 65 or ”Adding a Single IP Address or DNS Name for Discovery” on
page 66 for more information.
• User name for accessing the HP CIMOM
• Password for accessing HP CIMOM.
If you have Command View version 2.0 or later, the default password is administrator. If you
have Command View earlier than version 2.0, refer to the documentation that shipped with
Command View for the default password.
Discovery from HP SE by Using Command View XP
To discover HP storage systems by using Command View XP: