HP Storage Essentials V5.1 Installation Guide Second Edition (Linux Release) (T4283-96055, November 2006)

Storage Essentials 5.1 Installation Guide 101
Engenio storage
systems
Can be discovered two ways:
• Entering the IP address/DNS
name, user name and password
of a controller for an Engenio
storage system. Discovers only
the corresponding IP address of
the controller.
• Entering the IP address/DNS
name, user name and password
of a proxy that is used to
manage an Engenio storage
system. Discovers all controllers
known to the proxy.
See ”Discovering Engenio Storage
Systems” on page 106.
HDS storage
systems
Discover the server running
HiCommand Device Manager.
See ”Discovering HDS Storage
Systems” on page 108 for more
information.
HP storage systems Discover the server running the HP
CIMOM.
See ”Discovering HP
StorageWorks XP Arrays” on
page 115.
IBM Storage
Systems
Discover the CIMOM that talks to
the IBM storage systems you want
to monitor.
See ”Discovering IBM Storage
Systems” on page 118.
Sun StorEdge 3510 Discovered through proxy software
called Sun StorEdge™
Configuration Service. On the
discovery page the user should
enter the hostname or IP address of
the computer running the Sun
StorEdge 3510 SMI-S provider.
See ”Discovering Sun StorEdge
3510 Storage Systems” on
page 120.
Sun StorEdge 6920
and 6940
Discover the storage system directly. See ”Discovering Sun StorEdge
6920 and 6940 Storage Systems”
on page 122.
Sun StorEdge 6130 Discover the storage system directly.
The username does not matter. The
password matters only for
provisioning.
See ”Discovering Sun StorEdge
6130 Storage Systems” on
page 123.
Xiotech Storage
Systems
Discover the storage system directly. See ”Discovering Xiotech Storage
Systems” on page 124.
Table 8 Discovery Requirements for Storage Systems, Tape Libraries & NAS Devices (continued)
Element Discovery Requirements Additional Information