HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

Storage Essentials 5.1 CLI Guide 71
appiqshow -device -tapelibrary <library ID> -all
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a detailed description of all subcomponents, for example, port, media
access device, controller and changerdevice) that belongs to the specified tape library.
appiqshow -device -tapelibrary <library ID> -port
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a detailed description of all fibre channel ports that belongs to the specified
tape library.
appiqshow -device -tapelibrary <library ID>
-mediaaccessdevice
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a detailed description of all media access devices that belongs to the
specified tape library
appiqshow -device -tapelibrary <library ID>
-controller
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a detailed description all of front-end controller cards that belongs to the
specified tape library.
appiqshow -device -tapelibrary <library ID>
-changerdevice
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a detailed description of all changer devices that belongs to the specified
tape library.
Volumes
Use the following types of CLI commands to create and delete volumes:
• appiqcreate - Creates a volume.