HP Storage Essentials V5.1 Installation Guide Second Edition (Linux Release) (T4283-96055, November 2006)

Storage Essentials 5.1 Installation Guide 17
NOTE: The above message can safely be ignored as the network agent installation is not
included in the Oracle installation.
IMPORTANT: On some Linux systems, an error message may be shown at the end of the
installation. If this happens, click the OK button and manually close the Installer window.
Figure 3 Error Message
18.When the script is done running, click OK in the Setup Privileges window. The installer will close
automatically. Eject the Oracle Database Disk 3. You do not need to reboot at this time.
19.Install the Oracle patch as described in ”Installing the Oracle Patch” on page 17.
Installing the Oracle Patch
To install the Oracle patch on Linux:
1. Log in as user root.
2. Put the Database Patch CD in the disk drive.
3. Set the DISPLAY environment variable by using the following commands:
# DISPLAY=<ip-address>:displaynumber.screennumber
where <ip-address> is the address of the client from where the Installer script is launched.
# export DISPLAY
For example:
# DISPLAY=172.168.10.15:0.0
# export DISPLAY
4. Mount the Database Patch CD.
5. Make sure you are in the top-level directory:
# cd /
6. Execute the following command:
# /mnt/oradisk/oracle9206PatchInstaller.sh