HP Storage Essentials V5.1 Installation Guide First Edition (T4283-96025, August 2006)

Storage Essentials 5.1 Installation Guide v
Step 1 - Discover Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
SMI-S Switches Must Be Removed
and Rediscovered After Upgrading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Discovering Brocade Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Brocade SMI-S Provider Installation Requirements
(New Installations of the Management Server) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Verifying Brocade Rapid Program Is Set to 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
About Brocade Discovery (Specifying Brocade
Discovery Using Fabric Access API or SMI-S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Discovery from HP SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Discovery from HP SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Discovering CNT Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Discovery from HP SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Discovery from HP SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Discovering Cisco Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Discovery from HP SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Discovery from HP SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Discovering Sun StorEdge and QLogic Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Discovery from HP SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Discovery from HP SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Changing the SNMP Trap Listener Port for Sun StorEdge Switches . . . . . . . . . . . . . . . . . . . . . 58
Discovering McDATA and EMC Connectrix Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
SWAPI Setting Through a Proxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Step 1 - (McDATA Switches Only) Install the Bridge Agent . . . . . . . . . . . . . . . . . . . . . 61
Step 2 - Verify the Discovery Setting for McDATA and Connectrix Switches is Set to SWAPI.
62
Step 3 - Discover the Proxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Discovery from HP SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Discovery from HP SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
CIM_ERR_FAILED When Trying to Activate a Zone Set Using McDATA SWAPI . . . . . . . 63
SNMP Setting Through a Proxy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Step 1 - Change the Discovery Setting for Switches to SNMP . . . . . . . . . . . . . . . . . . . 64
Step 2 - Discover the Proxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Discovery from HP SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Discovery from HP SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
(Only applies to Discovery from HP SE)Step 3 - Make Sure There Are No Port Conflicts for
Receiving SNMP Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Step 4 - Set Up the Proxy to Send Traps to the Correct Port . . . . . . . . . . . . . . . . . . . . . 66
Contacting a McDATA or Connectrix Switch Directly. . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Discovery from HP SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Discovery from HP SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
(Discovery from HP SE Only) Make Sure There Are No Port Conflicts for Receiving SNMP Traps
68
Step 3 - Set Up the Proxy to Send Traps to the Correct Port . . . . . . . . . . . . . . . . . . . . . 68
(Discovery from HP SE only) Changing the Discovery Settings . . . . . . . . . . . . . . . . . . . . . 69
(Discovery from SE Only) Excluding McDATA and EMC Connectrix Switches from Discovery . . 70
Viewing Log Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71