HP Storage Essentials V5.1 Installation Guide First Edition (T4283-96025, August 2006)

Storage Essentials 5.1 Installation Guide 25
the help for your operating system platform for details on how to verify that the service is
running.
Step 7 - Remove and Rediscover Certain Elements
If you previously discovered the following elements, you must remove and rediscover them as
described in this section:
• File servers - You must remove its access points.
• Brocade (see ”Important Information About Upgrading and Brocade Switches” on page 26),
CNT, Cisco, QLogic, and specific models of McDATA switches supported through SMI-S (see
the Support Matrix for details on SMI-S compliant McDATA switches. Click Help >
Documentation Center > Support Matrix from Storage Essentials).
• Elements discovered in builds earlier than 4.0:
•CNT switches
• HP XP storage systems
• HP EVA storage systems
• Sun 6920 storage systems
HP SIM
If you are only deleting elements discovered through SMI-S, you only need to delete them in HP
SIM. If you are deleting elements not discovered through SMI-S, you must delete them from HP SIM
and from HP SE.
1. To remove elements from the SIM database:
a. Click Systems in the left pane.
b. Select the elements you want to delete.
c. Click Delete.
2. Rediscover the elements you removed. Select Options > Discovery. Refer to the HP SIM
documentation on the different parts of discovery.
HP SE
1. To remove elements and their access points:
a. Go to the Get Topology Information page for the Topology (Tools > Storage Essentials >
Home. Then, click Discovery > Topology in the upper-right corner).
b. Click the button corresponding to the elements you need to remove.