HP Storage Essentials V5.1 Installation Guide Second Edition (Linux Release) (T4283-96055, November 2006)

Storage Essentials 5.1 Installation Guide 231
C:\Program Files\IBM FASt MSJ\ql2xhai2.dll
Driver Information for Verifying QLogic Adapters
This section provides information for verifying QLogic adapters.
If you have QLogic Adapters:
When you install the SNIA HBA, it either came with the driver or SANsurfer, the registry setting is
most likely in the following location, which varies by release:
HKEY_LOCAL_MACHINE\SOFTWARE\SNIA\HBA\QL2XXX
Newer drivers points to C:\WINNT\system32\ql2xhai2.dll, but they also have system32\qlsdm.dll
available. Earlier drivers points to C:\WINNT\System32\qlsdm.dll
Driver Information for Verifying AMCC/JNI Adapters
The SNIA HBA comes from JNI SNIA 2.0. The SNIA Library is in a separate package without the
drivers. The registry setting is the following:
HKEY_LOCAL_MACHINE\SOFTWARE\SNIA\HBA\JNI
The SNIA Library can be found in the following location:
C:\Program Files\JNI\JNIsnia\Jni\JniHbaLib.dll
Upgrading a Host with the Latest CIM Extension
To avoid the following issues from occurring after you upgrade the CIM Extension for Windows,
perform the steps provided in this section:
• The Host CIM Extension Version Report in Reporting still displays the previous version.
• Host bus adapter data for the Windows host is removed from the management server database.
• If the Windows host has Emulex drivers, it is missing previously obtained data from switches and
storage systems.
• FSRM scans are not possible.
Perform the following steps to avoid or resolve these issues:
1. Upgrade the management server.
2. Upgrade the CIM Extension on the Windows hosts.
NOTE: You do not need to upgrade the CIM Extensions all at once. Keep in mind, however,
that CIM Extensions from earlier versions do not return all information, such as FSRM data. It
is strongly recommended you upgrade your CIM Extensions on Windows as soon as
possible.
3. If hosts are not in the “Default” discovery group, you will need to restart AppStorManager, which
is the service for the management server. To avoid restarting AppStorManager, you can move
hosts to the “Default” discovery group.
Do one of the following: