Brocade FICON Administrator's Guide v7.1.0 (53-1002753-01, March 2013)

72 FICON Administrator’s Guide
53-1002753-01
Swapping port area IDs
5
FRU numbers
Following are the Brocade FRU numbers provided for error reports and associated FRU names that
display in error reports. Note that the FRU number does not actually display in the error reports, but
its associated FRU name does display.
1 = SLOT1
2 = SLOT2
3 = SLOT3
4 = SLOT4
5 = SLOT5
6 = SLOT6
7 = SLOT7
8 = SLOT8
9 = SLOT9
10 = SLOT10
11 = SLOT11
12 = SLOT12
17 = PWR1
18 = PWR2
19 = PWR3
20 = PWR4
24 = FAN1
25 = FAN2
26 = FAN3
30 = CHASSIS
31 = WWN-CRD
Swapping port area IDs
If a port malfunctions, or if you want to connect to different devices without having to rewire your
infrastructure, you can move a port’s traffic to another port (swap port area ID) without changing
the I/O Configuration Data Set (IOCDS) on the mainframe computer.
To swap port area IDs, refer to the “Swapping port area IDs” procedure in the Fabric OS
Administrator’s Guide.
For more detail on the following commands that you will use to swap port area IDs, refer to the
Fabric OS Command Reference Manual:
portSwapEnable
portDisable
portSwap
portSwapShow
PortSwapDisable