Brocade FICON Administrator's Guide v7.1.0 (53-1002753-01, March 2013)

FICON Administrator’s Guide 87
53-1002753-01
Basic Switch Configuration
B
If you are enabling FMS (CUP), disable all ports assigned address 0xFE and
0xFF.
portdisable
Enable FMS if FICON CUP will be used. ficoncupset fmsmode enable
ficoncupshow fmsmode
Set the default zone for no access. defZone --noaccess
cfgsave
defZone --show
Configure zones. This is much easier with Brocade Network Advisor or Web
Tools. Typically scripts are used when using Fabric OS commands,.
cfgclear
cfgcreate
cfgdelete
cfgdisable
cfgenable
cfgremove
cfgsave
cfgshow
Clear all port statistics and trace information. supportsave -R
errclear
statsclear
portlogclear
diagclearerror -all
tracedump -c
slotstatsclear
errclear
ficonclear rlir
Turn on FICON logging. supportshowcfgenable ficon
Set port fencing. Setting port fencing parameters is much easier with
Brocade Network Advisor.
To clear alarms:
fwalarmsfilterset 0
To define alarms:
fwconfigure
Respond to menu driven prompts
accordingly
To enabled the defined alarms:
fwalarmsfilterset 1
TABLE 11 Switch configuration example and commands
Feature Relevant Commands