Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 9 of 53
3040 - cmaidad
Log message: “Accelerator Board Battery status change, slot number: [cpqDaCntlrSlot]. Battery failed.
Status: %s.”
SNMP trap: cpqDa6AccelBatteryFailed - 3040 in CPQIDA.MIB
Symptom: Accelerator Board Battery Failed. The agent has detected a battery failure associated with the
array accelerator cache board.
User action: Replace the Accelerator Cache Board.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqDaCntlrHwLocation
 cpqDaCntlrModel
 cpqDaAccelCntlrIndex
 cpqDaAccelSerialNumber
 cpqDaAccelTotalMemory
Supporting SNMP trap description: “Battery status is failed”
3041 - cmaidad
Log message: " Tape Library Status Change, slot number: [cpqDaCntlrHwLocation], bus number
[cpqDaTapeLibraryScsiBus], Target ID: [cpqDaTapeLibraryScsiTarget], Lun Number:
[cpqDaTapeLibraryScsiLun]. Status is now [cpqDaTapeLibraryStatus]."
SNMP trap: cpqDa6TapeLibraryStatusChange - 3041 in CPQIDA.MIB
Symptom: "Tape Library Status Changed. This trap signifies that the agent has detected a change in the
status of a tape library. The variable cpqDaTapeLibraryStatus indicates the current tape library status.
The variable cpqDaTapeLibraryScsiTarget indicates the SCSI ID of the tape library.
User action: If the tape library is failed, check the tape library front panel.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqDaCntlrHwLocation
 cpqDaTapeLibraryCntlrIndex
 cpqDaTapeLibraryScsiBus
 cpqDaTapeLibraryScsiTarget
 cpqDaTapeLibraryScsiLun
 cpqDaTapeLibraryModel
 cpqDaTapeLibraryFWRev
 cpqDaTapeLibrarySerialNumber
 cpqDaTapeLibraryStatus
Supporting SNMP trap description: " Tape Library Status Change, slot number:
[cpqDaCntlrHwLocation], bus number [cpqDaTapeLibraryScsiBus], Target ID:
[cpqDaTapeLibraryScsiTarget], Lun Number: [cpqDaTapeLibraryScsiLun]. Status is now
[cpqDaTapeLibraryStatus]."
3042 - cmaidad
Log message: Tape Library Door Status Change, slot number: [cpqDaCntlrHwLocation], bus number
[cpqDaTapeLibraryScsiBus], Target ID: [cpqDaTapeLibraryScsiTarget], Lun Number:
[cpqDaTapeLibraryScsiLun]. Status is now [cpqDaTapeLibraryDoorStatus]".
SNMP trap: cpqDa6TapeLibraryDoorStatusChange - 3042 in CPQIDA.MIB
Symptom: Tape Library Door Status Change. This trap signifies that the agent has detected a change in
the door status of a tape library. The variable cpqDaTapeLibraryDoorStatus indicates the current tape
library door status. The variable cpqDaTapeLibraryScsiTarget indicates the the SCSI ID of the tape
library.