Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 8 of 53
Supporting SNMP trap description: “Status is now [cpqDaCntl rBoardStatus].”
3034 - cmaidad
Log message: “Logical Drive Status Change: [cpqDaCntl rHwLocation], Drive: [cpqDaLogDrvI ndex].
Status is now [cpqDaLogDrvStatus].”
SNMP trap: cpqDa6LogDrvStatusChange - 3034 in CPQIDA.MIB
Symptom: Logical Drive Status Change. The agent has detected a change in the status of a drive array
logical drive. The variable cpqDaLogDrvStatus indicates the current logical drive status.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqDaCntlrHwLocation
 cpqDaLogDrvCntlrIndex
 cpqDaLogDrvIndex
 cpqDaLogDrvStatus
Supporting SNMP trap description: “Status is now [cpqDaLogDrvStatus].”
3038 - cmaidad
Log message: “Accelerator Board Status Change, slot number: [cpqDaCntlrSlot]. Status is now
[cpqDaAccelStatus string].”
SNMP trap: cpqDa6AccelStatusChange - 3038 in CPQIDA.MIB
Symptom: Accelerator Board Status Change. The agent has detected a change in the status of an array
accelerator cache board. The current status is represented by the variable cpqDaAccelStatus.
User action: If the accelerator board status is permDisabled(5), you might need to replace the accelerator
board.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqDaCntlrHwLocation
 cpqDaCntlrModel
 cpqDaAccelCntlrIndex
 cpqDaAccelSerialNumber
 cpqDaAccelTotalMemory
 cpqDaAccelStatus
 cpqDaAccelErrCode
Supporting SNMP trap description: “Status is now [cpqDaAccelStatus].”
3039 - cmaidad
Log message: “Accelerator Board Bad Data, slot number: [cpqDaCntlrSlot]. Accelerator lost battery
power. Data Loss possible.”
SNMP trap: cpqDa6AccelBadDataTrap - 3039 in CPQIDA.MIB
Symptom: Accelerator Board Bad Data. The agent has detected an array accelerator cache board that
has lost battery power. If data was being stored in the accelerator cache memory when the server lost
power, that data has been lost.
User action: Verify that no data was lost.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqDaCntlrHwLocation
 cpqDaCntlrModel
 cpqDaAccelCntlrIndex
 cpqDaAccelSerialNumber
 cpqDaAccelTotalMemory
Supporting SNMP trap description: “Accelerator lost battery power. Data Loss possible.”