Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 5 of 53
Foundation agents
Trap IDs: 10003-10008
10003 - cmathreshd
Log message: “Compaq Generic Test Trap (10003): %s”
SNMP trap: cpqHo2GenericTrap - 1003 in PQHOST.MIB
Symptom: Generic trap.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqHoGenericData
Supporting SNMP trap description: “[cpqHoGenericData]”
10004 - cmathreshd
Log message: “%s: Variable %s has value %d <= %d.”
SNMP trap: cpqMe2FallingAlarm - 10004 in CPQTHRESH.MIB
Symptom: Falling Threshold passed. An alarm entry has crossed its falling threshold. The instances of
those objects contained within the variable list are those of the alarm entry which generated this trap.
User action: None required
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqMeAlarmVariable
 cpqMeAlarmSampleTyp
 cpqMeAlarmValue
 cpqMeAlarmFallingThreshold
 cpqMeAlarmOwner
Supporting SNMP trap description: “[cpqMeAlarmOwner]: Variable [cpqMeAlarmVariable] has value
[cpqMeAlarmValue] <= [cpqMeAlarmFal li ngThreshold].”
10005 - cmathreshd
Log message: “Rising Threshold Trap”
“Alarm Variable %s”
“Threshold Value %d”
“Alarm Value %d”
“Alarm Sample Type %s”
“Alarm Owner %s”
“Alarm Severity %d”
“Alarm Description %s”
SNMP trap: cpqMeRisingAlarmExtended - 10005 in CPQTHRSH.MIB
Symptom: Rising Threshold passed. An alarm entry has crossed its rising threshold. The instances of
those objects contained within the variable list are those of the alarm entry which generated this trap.
User action: None required
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqMeAlarmVariable
 cpqMeAlarmSampleType
 cpqMeAlarmValue
 cpqMeAlarmRisingThreshold
 cpqMeAlarmOwner