Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 39 of 53
9004 - cmasm2d
Log message: “The Remote Insight Battery has failed and needs to be replaced”
SNMP trap: cpqSm2BatteryFailed - 9004 in CPQSM2.MIB
Symptom: Remote Insight Battery Failed. The Remote Insight battery has failed and needs to be
replaced.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
Supporting SNMP trap description: “Remote Insight battery failed.”
9005 - cmasm2d
Log message: “The Remote Insight firmware has detected a board self test error”
SNMP trap: cpqSm2SelfTestError - 9005 in CPQSM2.MIB
Symptom: Remote Insight/Integrated Lights-Out Self Test Error. The Remote Insight/Integrated Lights-
Out firmware has detected a Remote Insight self test error.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqSm2CntlrSelfTestErrors
Supporting SNMP trap description: “Remote Insight/Integrated Lights-Out self test error
[cpqSm2CntlrSelfTestErrors].”
9006 - cmasm2d
Log message: “The firmware is not responding”
SNMP trap: cpqSm2InterfaceError - 9006 in CPQSM2.MIB
Symptom: Remote Insight/Integrated Lights-Out Interface Error. The host OS has detected an error in the
Remote Insight/ Integrated Lights-Out interface. The firmware is not responding.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
Supporting SNMP trap description: “Server [sysName], Remote Insight/Integrated Lights-Out interface
error.”
9007 - cmasm2d
Log message: “The Remote Insight battery has been disconnected”
SNMP trap: cpqSm2BatteryDisconnected - 9007 in CPQSM2.MIB
Symptom: Remote Insight Battery Disconnected. The Remote Insight battery cable was disconnected.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
Supporting SNMP trap description: “Remote Insight battery disconnected.”
9008 - cmasm2d
Log message: “The Remote Insight keyboard cable has been disconnected”
SNMP trap: cpqSm2KeyboardCableDisconnected - 9008 in CPQSM2.MIB
Symptom: Keyboard Cable Disconnected. The Remote Insight keyboard cable was disconnected.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
Supporting SNMP trap description: “Remote Insight keyboard cable disconnected.”
9009 - cmasm2d
Log message: “The Remote Insight mouse cable has been disconnected”
SNMP trap: cpqSm2MouseCableDisconnected - 9009 in CPQSM2.MIB