Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 14 of 53
 cpqScsiPhyDrvVendor
 cpqScsiPhyDrvModel
 cpqScsiPhyDrvFWRev
 cpqScsiPhyDrvSerialNum
 cpqScsiPhyDrvOsName
Supporting SNMP trap description: “Status is now [cpqScsiPhyDrvStatus].”
5022 - cmasasd
Log message: “SAS Physical Drive Status Changed: Status changed from [previous
cpqSasPhyDrvStatus] to [current cpqSasPhyDrvStatus].”
SNMP trap: cpqSasPhyDrvStatusChange - 5022 in CPQSCSI.MIB
Symptom: Physical Drive Status Change. The agent has detected a change in the status of a SAS or
SATA physical drive. The current physical drive status is indicated in the cpqSasPhyDrvStatus variable.
User action: None required
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqSasHbaHwLocation
 cpqSasPhyDrvLocationString
 cpqSasPhyDrvHbaIndex
 cpqSasPhyDrvIndex
 cpqSasPhyDrvStatus
 cpqSasPhyDrvType
 cpqSasPhyDrvModel
 cpqSasPhyDrvFWRev
 cpqSasPhyDrvSerialNumber
cpqSasPhyDrvSasAddress
Supporting SNMP trap description: “Status is now [cpqSasPhyDrvStatus].”
5023 - cmasasd
Log message: “SAS Logical Drive Status Changed: Status changed from [previous cpqSasLogDrvStatus]
to [current cpqSasLogDrvStatus].”
SNMP trap: cpqSasLogDrvStatusChange - 5023 in CPQSCSI.MIB
Symptom: Logical Drive Status Change. The agent has detected a change in the status of a SAS or
SATA logical drive. The current logical drive status is indicated in the cpqSasLogDrvStatus variable.
User action: None required
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqSasHbaHwLocation
 cpqSasLogDrvHbaIndex
 cpqSasLogDrvIndex
 cpqSasLogDrvStatus
 cpqSasLogDrvOsName
Supporting SNMP trap description: “Status is now [cpqLogPhyDrvStatus].”
5025 - cmasasd
Log message: “SAS Tape Drive Status Changed: Status changed from [previous cpqSasTapeDrvStatus]
to [current cpqSasTapeDrvStatus].”
SNMP trap: cpqSas2TapeDrvStatusChange - 5025 in CPQSCSI.MIB
Symptom: SAS Tape Drive Status Change. The agent has detected a change in the status of a SAS tape
drive. The current tape drive status is indicated in the cpqSasTapeDrvStatus variable.
User action: None required
Supporting SNMP trap data: