Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 11 of 53
 cpqDaTapeDrvLunIndex
 cpqDaTapeDrvName
 cpqDaTapeDrvFwRev
 cpqDaTapeDrvSerialNumber
Supporting SNMP trap description: “Cleaning is needed for the tape drive.”
3045 - cmaidad
Log message: “Tape Drive Cleaning Tape Needs Replacing, slot number: [cpqDaCntlrSlot], bus number:
[cpqDaTapeDrvBusIndex], drive ID: [cpqDaTapeDrvScsiIdIndex]”
SNMP trap: cpqDa6TapeDriveCleanTapeReplace - 3045 in CPQIDA.MIB
Symptom: Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an autoloader tape
unit has a cleaning tape that has been fully used and needs to be replaced with a new cleaning tape.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqDaCntlrHwLocation
 cpqDaTapeDrvCntlrIndex
 cpqDaTapeDrvBusIndex
 cpqDaTapeDrvScsiIdIndex
 cpqDaTapeDrvLunIndex
 cpqDaTapeDrvName
 cpqDaTapeDrvFwRev
 cpqDaTapeDrvSerialNumber
Supporting SNMP trap description: “Cleaning tape needs replacing”
3046 - cmidad
Log message: “Physical Drive Status Change: [cpqDaCntlrHwLocation] [cpqDaPhyDrvLocationStri ng].
Status is now [cpqDaPhyDrvStatus string].”
SNMP trap: - cpqDa7PhyDrvStatusChange 3046 in CPQIDA.MIB
Symptom: Physical Drive Status Changed. The agent has detected a change in the status of a drive array
physical drive. The variable cpqDaPhyDrvStatus indicates the current physical drive status.
User action: If the physical drive status is failed(3) or predictiveFailure(4), replace the drive.”
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqDaCntlrHwLocation
 cpqDaPhyDrvCntlrIndex
 cpqDaPhyDrvIndex
 cpqDaPhyDrvLocationString
 cpqDaPhyDrvType
 cpqDaPhyDrvModel
 cpqDaPhyDrvFWRev
 cpqDaPhyDrvSerialNum
 cpqDaPhyDrvFailureCode
 cpqDaPhyDrvStatus
 cpqDaPhyDrvBusNumber
Supporting SNMP trap description: “Physical Drive Status is now [cpqDaPhyDrvStatus].”
3047 - cmaidad
Log message: “Spare Drive Status Change: [cpqDaCntlrHwLocation] [cpqDaS pareLocationStri ng].
Status is now [cpqDaSpareStatus string].”
SNMP trap: cpqDa7SpareStatusChange - 3047 in CPQIDA.MIB
Symptom: Spare Drive Status Change. The agent has detected a change in the status of a drive array
spare drive. The variable cpqDaSpareStatus indicates the current spare drive status.