HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter User Guide

Introduction 7
LED indicator Status Description
ACT Off No link to the adapter is established. The
adapter is not receiving power or the cable
connection is faulty.
Green &
Flashing
The adapter is sending or receiving network
data at 10/100/1000 Mb/s as indicated by
the 10/100/1000 (speed) LED. The adapter is
receiving power and the cable connection is
good.
LNK/Speed Off
(Dark)
No link to the adapter is established. The
adapter is not receiving power or the cable
connection is faulty.
Green The adapter is sending or receiving network
data at 10/100 Mb/s.
Orange The adapter is sending or receiving network
data at 1000 Mb/s.
UTP CAT5 cable
The NC382T adapter can use existing UTP CAT5 (or better) cable to deliver Gigabit Ethernet over
copper, according to the IEEE 802.3ab specifications. For new installations, CAT5e (enhanced CAT5)
cable is recommended. For troubleshooting and other information about cabling, see UTP Cable
Specifications (on page 11).