HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter User Guide

Specifications 11
Specifications
HP NC382T PCI Express Dual Port Multifunction
Gigabit Server Adapter specifications
Specification Value
Network Controller Chipsets Broadcom 5709C
Bus Type PCI Express
Bus Width Four lanes
Bus Speed 2.5 GHz
Data Transfer Method Bus Master DMA
Power Requirement Operating Voltage: +3.3V +/-5%
Power Consumption: 3.63 Watts
Maximum: 1.1A @ 3.3V (DC)
Wake on LAN Support Enabled; Disabled; Default:Disabled
Standards Supported IEEE802.3ab, IEEE802.3ad, IEEE802.3u, IEEE802.3x, IEEE802.3,
IEEE802.1p, IEEE802.1q
Dimensions 16.765 cm x 6.89 cm (without bracket) (6.600 x 2.713 inches (L x W))
Connector and Distances Two RJ-45 Connectors, Cable and lengths as follows:
10BASE-T: Category 3, 4, or 5 UTP 100 Meters (328 feet)
100/1000BASE-T: Category 5 UTP 100 Meters (328 feet)
Interrupts Supported Automatically configured
Temperature Range Operating: 0°C to 55°C (32°F to 131°F)
Storage: -40°C to 85°C (-40°F to 185°F)
Relative Humidity (non-condensing) Operating: 10% to 90%
Storage: 5% to 95%
Safety Compliance UL Mark (US and Canada)
CE Mark
EN 60590
UTP cable specifications
To connect to the network, the NC382T uses the following cable for 1000Base-T transmission:
• CAT5 UTP or better twisted-pair
• 22-26 AWG, 100Ω @ 1 MHz
• EIA/TIA 568a or EIA/TIA 568b