HP StorageWorks SmartStart EVA Storage 3.3 Release Notes (T5505-96052, August 2010)

Reason: The storage volume you created has not been detected. (7007,

blm_storage_volume_not_found)

This error occurs when the host on which you attempted to create the storage volume cannot connect

to the array through the fabric. Other management operations succeed because they use connections

to HP Command View EVA over Ethernet.

To resolve this situation, verify the zone configuration of the switch.

javaw.exe – Unable to locate component error

During HP Command View EVA installation, the following error message can appear:

javaw.exe - Unable To Locate Component; This application has failed to

start because WINSPOOL.DRV was not found. Re-installing the application

may fix this problem.

This error occurs when the HP Command View EVA installer attempts to create desktop icons for the

applications that it installed.

Because the error occurs after HP Command View EVA installed all applications, you do not need to

reinstall the applications. To continue, click OK.

If the desktop shortcuts do not appear, you can create them manually. Common executable files and

shortcuts are located as follows:

C:\Program Files\Hewlett-Packard\Sanworks\

Element Manager for StorageWorks HSV\

sssu.exe

HP StorageWorks Storage System Scripting Utility

https://localhost:2372

HP StorageWorks Command View EVA

C:\Program Files\Hewlett-Packard\EVA Per-

formance Monitor\evaperf.exe

HP StorageWorks Command View EVAPerf