HP StorageWorks SmartStart EVA Storage 3.
Legal and notice information © Copyright 2010 Hewlett-Packard Development Company, L.P. Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.
Version: 3.3 Description HP StorageWorks SmartStart EVA Storage is an application that helps you install software programs and drivers and configure an HP StorageWorks 4400 Enterprise Virtual Array (EVA4400) storage system. HP StorageWorks Command View EVA 9.3 is included in HP SmartStart EVA Storage 3.3. These release notes contain information specific to HP SmartStart EVA Storage 3.3. NOTE: For information about layered application support, see Table 2.
Important notes This section identifies important notes and workarounds for your HP EVA storage system and HP SmartStart EVA Storage. Video tutorials HP SmartStart EVA Storage for Windows contains video tutorials that describe HP SmartStart EVA Storage concepts.
Emulex 8 Gb/s HBAs require Windows hotfix If the management server is running Microsoft Windows 2003 and has Emulex 8 Gb/s HBAs (HP part numbers AJ762A and AJ763A) installed, HP Command View EVA might not display any arrays. To resolve this issue, you must install a Microsoft hotfix. Go to the following link for details and the hotfix download: http://support.microsoft.com/kb/945119 If you are using the server for storage only, not as a management server, you do not need to install this hotfix.
proceeding. Otherwise, you might need to return to the main menu and restart HP SmartStart EVA Storage. Running HP SmartStart EVA Storage from a network share To run HP SmartStart EVA Storage from the Intranet or Internet network share, the Intranet zone security level must be set to Full Trust. Otherwise, the operation fails and A .NET Security Exception has occurred error message is displayed. To change the zone security level: 1. Select Control Panel > Administration Tools > Microsoft .NET 2.
Reason: The storage volume you created has not been detected. (7007, blm_storage_volume_not_found) This error occurs when the host on which you attempted to create the storage volume cannot connect to the array through the fabric. Other management operations succeed because they use connections to HP Command View EVA over Ethernet. To resolve this situation, verify the zone configuration of the switch. javaw.
3. Mount the disk. For example, mount -t iso9660 -o ro /dev/cdrom /mnt/cdrom. 4. Change the current directory to the application directory. For example, cd /mnt/cdrom/app. 5. Run the HP SmartStart EVA Storage executable script as follows: ./HPSmartStartEVA SELinux prevents HP SmartStart EVA Storage from running on Red Hat Enterprise Server 5.3 With Red Hat Enterprise Server 5.3, you might need to disable SELinux temporarily while using HP SmartStart EVA Storage.
