HP StorageWorks SmartStart EVA Storage 3.
Legal and notice information © Copyright 2010 Hewlett-Packard Development Company, L.P. Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.
Version: 3.2 Description HP StorageWorks SmartStart EVA Storage is an application that helps you install software programs and drivers and configure an HP StorageWorks 4400 Enterprise Virtual Array (EVA4400) storage system. HP StorageWorks Command View EVA 9.2 is included in HP SmartStart EVA Storage 3.2. These release notes contain information specific to HP SmartStart EVA Storage 3.2. NOTE: For information about layered application support, see Table 2.
Operating systems HP SmartStart EVA Storage is supported on Windows 2003, Windows 2008, Windows 2008 R2, Red Hat Enterprise Server 5.3, SUSE Linux Enterprise Server 10 SP3, and SUSE Linux Enterprise Server 11. IMPORTANT: HP SmartStart EVA Storage for Linux supports using the server for storage only, not as a management server. HP SmartStart EVA for Linux does not support iSCSI devices. Both of these features are supported on Windows platforms only.
Inconsistent behavior while trying to provision storage After provisioning storage in Configure Fibre Channel application server, you are unable to provision storage. Verify the following: • The array is managed by the HP Command View EVA management station you specified. Ensure that all arrays that HP Command View EVA can discover are managed by that instance of HP Command View EVA. • The storage arrays are in an operational state.
2. Do one of the following: • Log in as an Administrator. • Reset User Account Control: 1. Open User Accounts. 2. Click Turn User Account Control on or off. 3. If prompted, enter an administrator password or confirmation. 4. Select the Use User Account control (UAC) to help protect your computer box to turn on UAC, or clear the box to turn off UAC. 5. Click OK. IMPORTANT: HP recommends that you not turn UAC off permanently. If you do turn it off, you must turn it back on as soon as possible.
6. Click Finish to exit the utility. Javascript error message After using HP SmartStart EVA Storage to install HP Command View EVA, a Javascript error messages can appear when you attempt to run HP Command View EVA. This can occur if your browser is not configured correctly. To avoid these error messages, ensure that your browser is configured as described in HP StorageWorks Command View EVA Installation Guide.
HP StorageWorks Command View EVA https://localhost:2372 HP StorageWorks Command View EVAPerf C:\Program Files\Hewlett-Packard\EVA Performance Monitor\evaperf.exe Related documentation PDF versions of relevant documentation for both HP SmartStart EVA Storage for Windows and HP SmartStart EVA Storage for Linux are located on the HP StorageWorks SmartStart EVA CD for Windows in the documentation folder.
Screen does not display result information A task can fail to display requested information due to CD ROM load time or a .NET load issue of XSL file. If a task does not display requested information, for example, a request for HBA information displays ... Checking HBA information ..., but the HBA information does not appear, click Cancel, and then without quitting HP SmartStart EVA Storage, restart the task.
