HP StorageWorks SmartStart EVA Storage 3.
Legal and notice information © Copyright 2009 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.
Version: 3.1 Description HP StorageWorks SmartStart EVA Storage is an application that helps you install software programs and drivers and configure an HP StorageWorks 4400 Enterprise Virtual Array (EVA4400) storage system. HP StorageWorks Command View EVA 9.1 is included in HP SmartStart EVA Storage 3.1. These release notes contain information specific to HP SmartStart EVA Storage 3.1. NOTE: For information about layered application support, see HP StorageWorks Command View EVA 9.1 release notes.
Video tutorials This version contains video tutorials that describe HP SmartStart EVA Storage concepts. The tutorials can be accessed from: • Online help—Requires a Flash player and a 32-bit system (x86) • GUI—Available to run on all systems Running tutorials from online help The tutorials are located in the HP SmartStart EVA Storage online help under Contents > What’s new > Online help video tutorials.
To resolve this issue, you must install a Microsoft hotfix. Go to the following link for details and the hotfix download: http://support.microsoft.com/kb/945119 NOTE: If you are using the server for storage only, not as a management server, you do not need to install this hotfix.
proceeding. Otherwise, you might need to return to the main menu and restart HP SmartStart EVA Storage. Troubleshooting the HP VDS Hardware Provider installation When using HP SmartStart EVA Storage to provision storage to your server, you may receive the following message: The HP VDS Hardware Provider may not be installed properly.
However, HP SmartStart EVA Storage has already formatted the drive, therefore you can cancel this prompt. If you choose to format the drive, the operating system will format it. Creating a storage volume results in an error HP SmartStart EVA Storage can appear to hang when creating a storage volume, and then displays the following error: Storage volume creation and mounting was not successful. Reason: The storage volume you created has not been detected.
If the desktop shortcuts do not appear, you can create them manually. Common executable files and shortcuts are located as follows: HP StorageWorks Storage System Scripting Utility C:\Program Files\Hewlett-Packard\Sanworks\ Element Manager for StorageWorks HSV\ sssu.exe HP StorageWorks Command View EVA https://localhost:2372 HP StorageWorks Command View EVAPerf C:\Program Files\Hewlett-Packard\EVA Performance Monitor\evaperf.
