HP Smart Update Manager 6.3.0 User Guide

NOTE: Select the check box if you want HP SUM to automatically add Associated
Devices. (Not available for all node types.)
• HP SUM displays the currently selected baseline and additional package. Use the
drop-down menu if you want to change these.
NOTE: If you want to delete a baseline or additional package, the baseline or additional
package cannot be associated with a node. Associate a new baseline or delete the node
to delete a baseline.
• Credentials
• OS Management Options – None, Use SNMP, Agentless Management Service, Use
WBEM
• Reboot Options – Reboot system, Reboot delay, Reboot message
• Installation Options – Downgrade or rewrite versions
• Force Options – Show firmware or software updates
3. Click OK to accept the changes and return to the Nodes screen.
iLO Federation inventory
1. From the iLO Federation screen, highlight the iLO Federation on which you want to take
inventory.
2. Click Actions→Inventory.
3. The iLO Federation Inventory procedure is the same as the Node Inventory procedure.
To inventory a node
1. From the Nodes screen, highlight the node and then click Actions→Inventory.
2. Select a baseline, additional package, or both to apply to the node.
3. Click Inventory.
Deleting an iLO Federation
1. From the iLO Federation screen, highlight the iLO Federation.
2. Click Actions→Delete.
3. Click Yes, delete.
Using the iLO Federation screen 69