HP Serviceguard Toolkits for Database Replication Solutions Release Notes Version B.02.00 - (November 2011)

Patches and Fixes in this Version
This section describes the required patches and the defects that have been fixed in version B.02.00
of the HP Serviceguard Toolkits for Database Replication Solutions.
Required and Recommended Patches
At the time of publication, the following patch is required for version B.02.00 of the HP Serviceguard
Toolkits for Database Replication Solutions:
• PHSS_42521 for HP-UX 11i v3
For more information on defects fixed in HP Serviceguard Toolkits for Database Replication Solutions
version B.02.00, patch PHSS_42521, see “ Fixes ” (page 8).
However, this is subject to change without notice. For the most current information, contact your
HP representative.
To receive the latest news on recommended patches, product support matrices, and recently
supported hardware, subscribe to the High Availability program tips and issues digest on the
Hewlett-Packard HP Support Center.
Patches can be superseded or withdrawn at any time. Check the status of any patch before
downloading it. An updated list of patches is available on the Hewlett-Packard Support Center:
http://www.hp.com/go/hpsc
Fixes
The following defects have been fixed in HP Serviceguard Toolkits for Database Replication Solutions
version B.02.00, patch PHSS_42521.
QXCR1001164103 Problem: The DB2 HADR toolkit support package which contains a single
database, does not allow packaging of multiple databases in an instance.
The fix is available in the following patch:
• B.02.00 PHSS_42521 on HP-UX 11i v3
QXCR1001164108 Problem: The DB2 HADR toolkit runs START HADR and STOP HADR
commands during package start and package halt, respectively. It does
not perform ACTIVATE and DEACTIVATE commands when starting and
stopping the HADR.
The fix is available in the following patch:
• B.02.00 PHSS_42521 on HP-UX 11i v3
QXCR1001164123 Problem: The DB2 HADR Toolkit does not perform a role takeover with peer
window only option, if the peer window is set.
The fix is available in the following patch:
• B.02.00 PHSS_42521 on HP-UX 11i v3
QXCR1001171528 If the db2 getsnapshot command is used in the monitoring script of
DB2 HADR toolkit, it might take a long time to provide the result.
The fix is available in the following patch:
• B.02.00 PHSS_42521 on HP-UX 11i v3
Known Problems and Workarounds
There are no known problems in version B.02.00 of the HP Serviceguard Toolkits for Database
Replication Solutions.
8 HP Serviceguard Toolkits for Database Replication Solutions B.02.00 Release Notes