HP Serviceguard Toolkit for Integrity Virtual Servers User Guide (June 2013)

Recommended ActionPossible CauseProblem Scenario
the cluster nodes, before creating guest
package in the cluster.
mscripts/
master_control_script.sh.
On node node-1, validation of package
vpar4 failed with: Failed to set
application control for vpar4:
hpvmmodify: Cannot set '-j 1 because
the guest has at least one DIO device.
hpvmmodify: Unable to modify the
vPar or VM
ERROR: Set Distributed Control: Failed
to set Distributed 1 on node-1
ERROR: Failed in verify_and_distribute
ERROR: Failed to validate /etc/
cmcluster/scripts/tkit/vtn/
tkit_module.sh
On node node-2, validation of package
vpar4 failed with: Failed to set
application control for vpar4:
hpvmmodify: Cannot set '-j 1 because
the guest has at least one DIO device.
hpvmmodify: Unable to modify the
vPar or VM.
ERROR: Set Distributed Control: Failed
to set Distributed 1 on node-2
ERROR: Failed in verify_and_distribute
ERROR: Failed to validate
/etc/cmcluster/scripts/tkit/vtn/tkit_module.sh
cmapplyconf: Error found in package
file: vpar4pkg.conf.
Verify if the VM host network is
configured appropriately.
Either the bridged_net configuration
is not available or cmviewcl –v
Unable to retrieve Serviceguard's
bridged_net configuration.
–fline command fails for some
reason.
37