HP Serviceguard Storage Management Suite Version A.04.01.01 for HP-UX 11i v3 Release Notes

1. Copy the contents of your 11i v3 OE media to an HP-UX depot, for example:
swcopy -s /11iv3OE_DVD \* @ /var/depots/my_hpux_depot
If there are multiple 11i v3 OE DVDs, repeat this with each DVD.
You can also use the interactive swcopy command to automatically mount and unmount the
DVD, for example:
swcopy -i \* @ /var/depots/my_hpux_depot
- then select Find Local CD-ROM in the Specify Source screen.
2. Copy the contents of the HP-UX Serviceguard and HP Storage Management Products media,
for example /11iv3SG_DVD, into the same HP-UX depot. If there are multiple Serviceguard
and Storage Management DVDs, repeat this with each DVD:
swcopy -s /11iv3SG_DVD \* @ /var/depots/my_hpux_depot
Or use interactive swcopy as shown in step 1.
3. If you plan to use this HP-UX depot to update systems other than the system where the depot
resides, the HP-UX depot must be registered. The swcopy command will automatically register
the depot when it is first created, but it is harmless to register it again just to be sure it is visible
to other systems. To do this, enter:
swreg -l depot @ /var/depots/my_hpux_depot
NOTE: HP-UX 11i v3 and an HP Serviceguard Storage Management Suite for HP-UX 11i
v3 non-CFS bundle (T2774EB, T8684EB, or T8694EB) can be installed on each node as part
of a rolling upgrade. See “Upgrading to a Different SG SMS Bundle” (page 21) for more
information on rolling upgrades.
Installing HP-UX 11i v3 and an HP Serviceguard Storage Management Suite for HP-UX 11i
v3 CFS bundle (T2777EB, T8687EB, or T8697EB) can be performed with an online or an
offline upgrade depending on the version that is currently installed. See “Upgrading to a
Different SG SMS Bundle” (page 21) to determine if an online upgrade is supported, or an
offline upgrade is required.
34 HP Serviceguard Storage Management Suite Version A.04.01.01 for HP-UX 11i v3 Release Notes