HP Serviceguard Storage Management Suite Version A.02.01 for HP-UX 11i v2 Release Notes, Edition 2 (May 2010)

firmware revisions. Also check for any updated patch requirements for the software products
being installed.
Patches for HP products and Veritas™ products included in the HP Serviceguard Storage
Management Suite bundles can be downloaded at: www.hp.com/go/sgsms/patches
NOTE: Before attempting a SG SMS bundle installation or upgrade, you must disable
AUTOSTART_CMCLD. See “Disabling Cluster Auto-Start on Reboot” (page 26)
Installing HP Serviceguard Storage Management Suite
To install software, run the SD-UX swinstall command. It will invoke a user interface that
will lead you through the installation. For additional information and tips on installing HP-UX
and HP applications see the HP-UX 11i Version 2 Installation and Update Guide available at: http://
docs.hp.com in the HP-UX 11i v2 Operating Environment section.
For information on installing Veritas products including VxVM or VxFS, see the Veritas 5.0
Installation Guide included on the HP Serviceguard Storage Management Suite media and also
available at: http://docs.hp.com - see VxFS and VxVM in the HP-UX 11i v2 Operating Environment
section.
Installation of an HP Serviceguard Storage Management Suite bundle automatically handles
dependencies on base-VxFS and base-VxVM as well as between products included in the bundles.
Installation steps should be performed in the following order:
1. If you are doing an offline upgrade, shutdown the cluster.
If you are doing a rolling upgrade, halt only the node that is currently being upgraded.
2. HP-UX 11i v2 (with all required patches) is required for loading an HP Serviceguard Storage
Management Suite bundle.
— If the system has a pre-5.0 version of Veritas Volume Manager already installed, the
installation process overwrites that version of the product.
— If any stand alone (not SG SMS) version of Veritas™ Cluster Volume Manager (CVM)
is installed, it must be removed before an HP Serviceguard Storage Management Suite
bundle can be installed.
3. Install the HP Serviceguard Storage Management Suite bundle. For bundles T2771CA,
T2773CA, T2774CA, T2775CA, or T2777CA, use the Serviceguard and Storage Management
Products media.
NOTE: When an upgrade of a SG SMS Operating Environment bundle (T8684CB, T8685CB,
T8686CB, T8687CB, T8694CB, T8695CB, T8696CB, T8697CB) includes a different Serviceguard
version than the one that is currently installed, a different procedure than the one described
in this step is necessary, see “How to Upgrade MCOE Bundles (T2794CA, T2795CA, T2796CA,
and T2797CA) to SG SMS Version A.02.01” (page 32) for additional information.
Use the appropriate bundle product number in place of T27xxCA. This installation will
reboot the system once:
swinstall -x autoreboot=true -s <depot> T27xxCA
The default setting for installation of the bundle is “reinstall=false” which preserves
any existing installation of the same version of a product.
4. After installation of the software, and one reboot is completed, apply any required product
patches.
During the initial reboot and until all required patches are applied, various startup errors
may be reported.
Compatibility Information and Installation Requirements 29