HP Serviceguard Storage Management Suite Version A.02.00 for HP-UX 11i v3 Release Notes, April 2008

NOTE: Before attempting a SG SMS bundle installation or upgrade, you must disable
AUTOSTART_CMCLD.
To disable AUTOSTART_CMCLD on all cluster nodes, access the/etc/rc.cofig.d/cmcluster
file and set AUTOSTART_CMCLD to 0, (AUTOSTART_CMCLD=0).
To re-enable Automatic startup (AUTOSTART_CMCLD) after completing your SG SMS bundle
installation or upgrade, set the flag AUTOSTART_CMCLD to 1 in the
/etc/rc.config.d/cmcluster file (AUTOSTART_CMCLD=1)
For more information on AUTOSTART_CMCLD, see the Setting up Autostart Features and Performing
a Rolling Upgrade sections in Managing Serviceguard, Fifteenth Edition, available at http://docs.hp.com
> High Availability > Serviceguard.
Installing HP Serviceguard Storage Management Suite
To install software, run the SD-UX swinstall command. It will invoke a user interface that
will lead you through the installation. For additional information and tips on installing HP-UX
and HP applications see the HP-UX 11i Version 3 Installation and Update Guide available at:
http://docs.hp.com in the HP-UX 11i v3 Operating Environment section.
For information on installing Veritas products including VxVM or VxFS, see the Veritas 5.0
Installation Guide included on the HP Serviceguard Storage Management Suite media and also
available at: http://docs.hp.com - see VxFS and VxVM in the HP-UX 11i v3 Operating Environment
section.
Installation of an HP Serviceguard Storage Management Suite bundle automatically handles
dependencies on base-VxFS and base-VxVM as well as between products included in the bundles.
Installation steps should be performed in the following order:
1. Shutdown the cluster if you are running Cluster Volume Manager (CVM).
2. HP-UX 11i v3 (with all required patches) is required for loading an HP Serviceguard Storage
Management Suite bundle.
— If the system has a pre-5.0 version of Veritas Volume Manager already installed, the
installation process overwrites that version of the product.
— If any stand alone (not SG SMS) version of Veritas™ Cluster Volume Manager (CVM)
is installed, it must be removed before an HP Serviceguard Storage Management Suite
bundle can be installed.
3. Install the HP Serviceguard Storage Management Suite bundle.
— For bundles T2771CB, T2772CB, T2773CB, T2774CB, T2775CB, T2776CB, or T2777CB,
use the Serviceguard and Storage Management Products media.
— For SG SMS Operating Environment bundles (T8684CB, T8685CB, T8686CB, T8687CB,
T8694CB, T8695CB, T8696CB, T8697CB) you must install the Operating Environment
(HAOE or DCOE) from the OE media, before installing the associated SG SMS bundle
from the Serviceguard and Storage Management Products media.
Use the appropriate bundle product number in place of T27xxCB. This installation will
reboot the system once:
swinstall -x autoreboot=true -s <depot> T27xxCB
The default setting for installation of the bundle is “reinstall=false” which preserves
any existing installation of the same version of a product.
4. After installation of the software, and one reboot is completed, apply any required product
patches.
During the initial reboot and until all required patches are applied, various startup errors
may be reported.
Compatibility Information and Installation Requirements 27