HP Serviceguard Storage Management Suite Version A.02.00 for HP-UX 11i v3 Release Notes, 2nd Edition, September 2008

Unsupported Bundle Change and Installation Scenarios
• Installing Storage Management Suite on top of HP Serviceguard Extension for RAC is not
supported.
If you have the two as separate products, install the Storage Management Suite bundle
T2776CB first, then install HP Serviceguard Extension for RAC.
• Rolling upgrades of Storage Management Suite bundles, that include Veritas Cluster File
System (CFS), are not supported. You must halt all cluster nodes when upgrading to a new
SG SMS CFS version.
• If a SG SMS bundle is installed on your system and you attempt to install or upgrade to an
OE version that includes Serviceguard and Veritas Storage Foundation versions that are not
supported with the SG SMS bundle, the installation will complete, but the Serviceguard
cluster will not start, or you will not be able to access the Veritas volumes. See “HP-UX
Operating Environment Upgrade Limitations” (page 36) for more information.
NOTE: For current information on Serviceguard and HP-UX versions that are supported
with various SG SMS versions, see the
HP Serviceguard/SGeRAC/Storage Management Suite/Serviceguard Manager Plug-in Compatibility
and Feature Matrix at:
http://docs.hp.com/en/5971/SG-SGeRAC-SMS-EMS%20Support.pdf
HP Serviceguard Storage Management Suite Compatibility with HP-UX Releases
HP Serviceguard Storage Management Suite Version A.02.00 is compatible with HP-UX 11i v2
and HP-UX 11i v3.
• HP Serviceguard Storage Management Suite Version A.02.00 bundles designated “TxxxxCA”
are compatible with HP-UX 11i v2
• HP Serviceguard Storage Management Suite Version A.02.00 bundles designated “TxxxxCB”
are compatible with HP-UX 11i v3
NOTE: HP-UX 11iv3 is supported with up to 64k lunpaths, however, Veritas™ products included
in the SG SMS Version A.02.00 bundles limit SG SMS lunpath support to a maximum of 32k
lunpaths on HP-UX 11i v3.
System Requirements
HP Serviceguard Storage Management Suite bundles run on HP 9000 or HP Integrity Servers.
Using both types of servers in the same cluster is supported.
Disk Requirements
Installation of any HP Serviceguard Storage Management Suite bundle requires a minimum of
550 MB of disk space in the root file system.
Before Installing HP Serviceguard Storage Management Suite Version A.02.00
Before installing an HP Serviceguard Storage Management Suite bundle, consult with your HP
representative to make sure that the cluster has the correct hardware upgrades and supported
firmware revisions. Also check for any updated patch requirements for the software products
being installed.
Patches for HP products and Veritas™ products included in the HP Serviceguard Storage
Management Suite bundles can be downloaded at: http://h71028.www7.hp.com/enterprise/cache/
286850-0-0-0-121.html
26 HP Serviceguard Storage Management Suite Version A.02.00 for HP-UX 11i v3 Release Notes