HP Serviceguard Storage Management Suite Version A.01.01 Release Notes, April 2008

HP Serviceguard Storage Management Suite Version A.01.01 Release Notes
Compatibility Information and Installation Requirements
Chapter 128
configuration. Also modify the CVM/CFS storage and related
package configuration as needed to fully remove the node from the
cluster configuration.
2. Follow any guidelines for software removal of the individual products
included in the HP Serviceguard Storage Management Suite bundle.
In general, products should be halted and unconfigured before
removal.
If the bundle includes ODM, unmount the /dev/odm device before
removing the bundle.
If any independently installed products have installation
dependencies on a product in the installed bundle, these products
must be removed before the bundle can be removed. For example, if
SGeRAC was independently installed on a system with Bundle
T2776BA, SGeRAC must be removed before T2776BA can be
removed since SGeRAC has dependencies on Serviceguard and
removing T2776BA will remove Serviceguard but not SGeRAC.
3. The swremove command should be issued from one system at a time.
Removing a HP Serviceguard Storage Management Suite bundle
removes the individual bundle tags associated with that bundle
(refer to Table 1-4, “Products and Associated Bundle,”) except for
Base-VXFS and Base-VXVM. These products must be individually
specified for removal. For example, to remove the contents of
T2771BA including Base-VXFS and Base-VXVM enter:
swremove -x autoreboot=true Base-VXFS Base-VXVM T2771BA
4. Verify all components have been removed. Use the swlist command
on one system at a time.
If the system is left with a zero-length binary configuration file
(/etc/cmcluster/cmclconfig), remove it.
Products Installed with HP Serviceguard Storage
Management Suite
Product components installed with HP Serviceguard Storage
Management Suite bundles are listed in Table 1-4, “Products and
Associated Bundle.”