HP Serviceguard Storage Management Suite A.03.01 Release Notes

NOTE:
• Due to the issue in the VRTSvxvm pre-install script, DRD clone does not boot when an upgrade
is made to A.03.00 from earlier bundles. Please use SG SMS version A.04.00.01 bundles,
if you are upgrading using DRD.
• If SG SMS A.02.00 or SG SMS A.02.01 is currently installed, and you plan to upgrade your
SG SMS version using DRD, there is a known issue already documented in some versions of
Serviceguard's checkinstall script. This checkinstall script issue is also documented
in QXCR1000901306 at: www.hp.com/go/hpsc Refer to the workaround notes in
QXCR1000901306 for instructions on how to perform this type of SG SMS upgrade.
Unsupported Bundle Change and Installation Scenarios
Installing Storage Management Suite on top of HP Serviceguard Extension for RAC is not supported.
If you have the two as separate products, install the Storage Management Suite bundle T2776DB
first, then install HP Serviceguard Extension for RAC.
NOTE: For current information on Serviceguard and HP-UX versions that are supported with
various SG SMS versions, see the
HP Serviceguard/SGeRAC/Storage Management Suite/Serviceguard Manager Plug-in Compatibility
and Feature Matrix at: www.hp.com/go/hpux-serviceguard-docs → HP Serviceguard
NOTE: Upgrades of “mixed OS” clusters (clusters that have some nodes running HP-UX 11i v2
and other nodes running HP-UX 11i v3 ) are not supported with SG SMS bundles that include
CVM/CFS (T2775xx, T2776xx, T27757xx). For more information see the HP Serviceguard Version
A.11.20 Release Notes at: www.hp.com/go/hpux-serviceguard-docs → HP Serviceguard
HP Serviceguard Storage Management Suite Compatibility with HP-UX Releases
HP Serviceguard Storage Management Suite Version A.03.01 bundles are designated “TxxxxDB”
- they are compatible with HP-UX 11i v3 only.
NOTE: HP-UX 11iv3 is supported with up to 64k lunpaths, however, Veritas™ products included
in the SG SMS Version A.03.01 bundles limit SG SMS lunpath support to a maximum of 32k
lunpaths on HP-UX 11i v3.
System Requirements
HP Serviceguard Storage Management Suite bundles run on HP 9000 or HP Integrity Servers.
Using both types of servers in the same cluster is supported.
Disk Requirements
Installation of any HP Serviceguard Storage Management Suite bundle requires a minimum of 550
MB of disk space in the root file system.
Before Installing HP Serviceguard Storage Management Suite Version A.03.01
Before installing an HP Serviceguard Storage Management Suite bundle, consult with your HP
representative to make sure that the cluster has the correct hardware upgrades and supported
firmware revisions. Also check for any updated patch requirements for the software products being
installed.
Patches for HP products and Veritas™ products included in the HP Serviceguard Storage
Management Suite bundles can be downloaded at: http://www.hp.com/go/sgsms/patches
Compatibility Information and Installation Requirements 25