HP Serviceguard Storage Management Suite A.03.00 Release Notes

copying the relevant software components from SG SMS OE bundle media and copying the
required Serviceguard and ECMT versions from the HP-UX OE media. A single swinstall
command is used for the installation.
For the HP-UX update, Serviceguard and ECMT are excluded from the update when you run the
update-ux command. General information about updating to HP-UX 11i v3 with update-ux,
is available at:www.hp.com/go/hpux-serviceguard-docs ->HP Serviceguard
Building a Common Depot for the Installation:
The tasks in the following example are performed on a depot server named: sw-depot.hp.com
1. Copy the SG SMS product (for example, T8684DB) and the required VxVM and VxFS software
from the SG SMS version A.03.00 media (mounted at /mnt/SMS.depot) to the installation
depot (/mnt/install.depot) residing on the depot server:
$ swcopy -x enforce_dependencies=false –s /mnt/SMS.depot\
Base-VxFS-501 Base-VxVM-501 Base-VxTools-501 VxFS-SDK-501 T2795CA\
@ /mnt/install.depot
2. Copy Serviceguard (T1905CA ) and ECMT (T1909BA) from the HP-UX OE (DCOE or HAOE)
DVD (mounted at /mnt/HP-UX.depot) to the installation depot (/mnt/install.depot):
$ swcopy -x enforce_dependencies=false –s /mnt/HP-UX.depot T1905CA\
T1909BA @ /mnt/install.depot
Performing the Update:
1. Shutdown the cluster, or shutdown an individual node (depending on if you are doing an
offline or a rolling upgrade).
2. Install the software from the installation depot on all cluster nodes (in parallel for offline
upgrades, or one node at a time for rolling upgrades) running the following command on
each cluster node:
$ swinstall -x autoreboot=true -s sw-depot.hp.com:/mnt/install.depot\
Base-VxFS-501 Base-VxVM-501 Base-VxTools-501 VxFS-SDK-501 T1905CA\
T1909BA T2795CA
3. After the software has been successfully installed on all of the cluster nodes:
• • If an offline upgrade was performed, the cluster can be restarted.
• • If a rolling upgrade was performed, each upgraded node can rejoin the cluster as soon
the upgrade is completed.
See Table 6 (page 22) for upgrade paths that support rolling or offline upgrades.
Removing HP Serviceguard Storage Management Suite
The SD-UX swremove command is used to uninstall the HP Serviceguard Storage Management
Suite software. The swremove command must be issued on one system at a time.
32 HP Serviceguard Storage Management Suite Version A.03.00 for HP-UX 11i v3 Release Notes