HP Serviceguard Storage Management Suite A.03.00 Release Notes

7. Re-join the Group B nodes to the cluster, one at a time:
a. Node 2 > cmrunnode node2
b. Node 3 > cmrunnode node3
8. Redistribute the application failover packages over ALL of the active cluster nodes (Group A
and Group B nodes).
9. Optional steps must be performed on the CVM master/CFS primary nodes to upgrade to the
new CVM and CFS protocol/layout versions (refer to the VxVM and VxFS Administrators
Guides for details):
• vxdctl upgrade to upgrade CVM protocol version
• vxdg upgrade <diskgroup> to upgrade disk group version
• vxupgrade <mountpoint> to upgrade to new file system layout version
Using Dynamic Root Disk Utilities (DRD) to upgrade to SG SMS A.03.00
You can upgrade to SG SMS A.03.00 using Dynamic Root Disk Utilities (DRD). The DRD utilities
necessary to do an upgrade to SG SMS A.03.00 are available at http://software.hp.com - you
should use DRD version A.3.4.91 or later, released in September 2009.
You can use DRD to upgrade to SG SMS A.03.00, (which requires patch PHSS_40152 or later
and includes Serviceguard A.11.19), from the following SG SMS versions only:
• SG SMS A.02.00 (with CFS patch PHSS_36690 or later and with patch PHSS_37602 or
later) - this SG SMS version includes Serviceguard A.11.18
• SG SMS A.02.01 - this SG SMS version includes Serviceguard A.11.19
NOTE:
• Due to the issue in the VRTSvxvm pre-install script, DRD clone does not boot when an upgrade
is made to A.03.00 from earlier bundles. Please use SG SMS version A.04.00.01 bundles,
if you are upgrading using DRD.
• Since SG SMS includes Serviceguard, there is a known issue already documented in some
versions of Serviceguard's checkinstall script. This checkinstall script issue is
documented in QXCR1000901306 at: http://www.hp.com/go/hpsc Refer to the workaround
notes in QXCR1000901306 for instructions on how to perform this type of SG SMS upgrade.
Unsupported Bundle Change and Installation Scenarios
Installing Storage Management Suite on top of HP Serviceguard Extension for RAC is not supported.
If you have the two as separate products, install the Storage Management Suite bundle T2776DB
first, then install HP Serviceguard Extension for RAC.
NOTE: For current information on Serviceguard and HP-UX versions that are supported with
various SG SMS versions, see the
HP Serviceguard/SGeRAC/Storage Management Suite/Serviceguard Manager Plug-in Compatibility
and Feature Matrix at:
www.hp.com/go/hpux-serviceguard-docs ->HP Serviceguard
HP Serviceguard Storage Management Suite Compatibility with HP-UX Releases
HP Serviceguard Storage Management Suite Version A.03.00 bundles are designated “TxxxxDB”
- they are compatible with HP-UX 11i v3 only.
NOTE: HP-UX 11iv3 is supported with up to 64k lunpaths, however, Veritas™ products included
in the SG SMS Version A.03.00 bundles limit SG SMS lunpath support to a maximum of 32k
lunpaths on HP-UX 11i v3.
Compatibility Information and Installation Requirements 25