Using Easy Deployment in Serviceguard and Metrocluster environments on HP-UX 11i v3

Launching package Easy Deployment from Serviceguard Manager

Figure 13: Serviceguard Manager Homepage

• In the Serviceguard Manager Homepage, as shown in Figure 13 above, click on the

[Configuration] drop-down menu.

• Click on [Package Easy Deployment] to open a second-level menu for the available

deployment options.

Note: These options are enabled only if the prerequisites for the corresponding applications, modules and/or toolkits

are satisfied.

• Clicking on an enabled package deploy option will open the corresponding deployment form to

complete the deployment process. For further assistance please refer to the appropriate package

Easy Deployment section in the following sections of the document. Serviceguard Manager also

offers context-specific online help on topics concerning using Serviceguard Manager for package

Easy Deployment.

Easy Deployment of SGeRAC toolkit packages

Software prerequisites

The following product(s) need to be pre-installed to use the Easy Deployment feature to deploy

SGeRAC toolkit packages:

• Serviceguard A.11.20 plus PHSS_41628 or superseding patch

• SGeRAC A.11.20 Patch—PHSS_41642 or superseding patch

• Oracle RAC 11g R2—must be installed on all nodes

• SG SMS versions A.03.01 or later—must be installed on all nodes

• SG-CFS Patch PHSS_41674 or later—must be installed on all nodes