Managing Serviceguard Sixteenth Edition, March 2009

CLUSTER STATUS
cfs-cluster up
NODE STATUS STATE
ftsys9 up running
ftsys10 up running
MULTI_NODE_PACKAGES
PACKAGE STATUS STATE AUTO_RUN SYSTEM
SG-CFS-pkg up running enabled yes
SG-CFS-DG-1 up running enabled no
SG-CFS-MP-1 up running enabled no
SG-CFS-SN-1 up running disabled no
The snapshot file system/local/snap1 is now mounted and provides a point
in time view of /tmp/logdata/log_files.
bdf
Filesystem kbytes used avail %used Mounted on
/dev/vg00/lvol3 544768 352233 180547 66% /
/dev/vg00/lvol1 307157 80196 196245 29% /stand
/dev/vg00/lvol5 1101824 678426 397916 63% /var
/dev/vg00/lvol7 2621440 1702848 861206 66% /usr
/dev/vg00/lvol4 4096 707 3235 18% /tmp
/dev/vg00/lvol6 2367488 1718101 608857 74% /opt
/dev/vghome/varopt 4194304 258609 3689741 7% /var/opt
/dev/vghome/home 2097152 17167 1949993 1% /home
/dev/vx/dsk/logdata/log_files
102400 1765 94353 2% /tmp/logdata/log_files
/dev/vx/dsk/dg1/vol1
102400 1765 94346 2% /local/snap1
Creating the Storage Infrastructure with Veritas Cluster Volume Manager (CVM)
NOTE: Check the Serviceguard/SGeRAC/SMS/Serviceguard Manager Plug-in Compatibility
and Feature Matrix and the latest Release Notes for your version of Serviceguard for
up-to-date information on support for CVM (and CFS - Cluster File System):
http://www.docs.hp.com -> High Availability -> Serviceguard.
This section has information about configuring the Veritas Cluster Volume Manager
without Veritas CFS (Cluster File System). The configuration may be needed to set up
raw devices for Serviceguard Extension for RAC.
The previous section, “Creating a Storage Infrastructure with Veritas Cluster File System
(CFS)” (page 233), has information about configuring a cluster with CFS.
Both solutions — with and without CFS — use many of the same commands, but in a
slightly different order.
Before starting, make sure the directory in which VxVM commands are stored
(/usr/lib/vxvm/bin) is in your path. Once you have created the root disk group
with vxinstall, you can use VxVM commands or the Veritas Storage Administrator
GUI, VEA, to carry out configuration tasks. Instructions for running vxinstall are in
Configuring the Cluster 241