Managing Serviceguard Seventeenth Edition, First Reprint December 2009

completes the operation. The time should be
selected based on the slowest boot time in the
cluster. Enter a value equal to the boot time of
the slowest booting node minus the boot time of
the fastest booting node plus 600 seconds (ten
minutes).
Default is 600,000,000 microseconds.
Can be changed while the cluster is running.
NETWORK_POLLING_INTERVAL Specifies how frequently the networks configured
for Serviceguard are checked.
Default is 2,000,000 microseconds (2 seconds).
This means that the network manager will poll
each network interface every 2 seconds, to make
sure it can still send and receive information.
The minimum value is 1,000,000 (1 second) and
the maximum value supported is 30 seconds.
IMPORTANT: HP strongly recommends using
the default. Changing this value can affect how
quickly the link-level and IP-level monitors detect
a network failure. See “Monitoring LAN
Interfaces and Detecting Failure: Link Level”
(page 92), “Monitoring LAN Interfaces and
Detecting Failure: IP Level” (page 98), and
“Reporting Link-Level and IP-Level Failures”
(page 101).
Can be changed while the cluster is running.
Cluster Configuration Planning 157