Managing Serviceguard Nineteenth Edition, Reprinted June 2011

Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Failover configured_node
Failback manual
Script_Parameters:
ITEM STATUS NODE_NAME NAME
Resource up ftsys9 /example/float
Subnet up ftsys9 15.13.168.0
Resource down ftsys10 /example/float
Subnet up ftsys10 15.13.168.0
Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled ftsys10
Alternate up enabled ftsys9
pkg2 now has the status down, and it is shown as unowned, with package switching disabled.
Resource /example/float, which is configured as a dependency of pkg2, is down on one
node. Note that switching is enabled for both nodes, however. This means that once global
switching is re-enabled for the package, it will attempt to start up on the primary node.
Status After Moving the Package to Another Node
If we use the following command
cmrunpkg -n ftsys9 pkg2
and then run cmviewcl -v, we’ll see:
CLUSTER STATUS
example up
NODE STATUS STATE
ftsys9 up running
Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY up 56/36.1 lan0
STANDBY up 60/6 lan1
PACKAGE STATUS STATE AUTO_RUN NODE
pkg1 up running enabled ftsys9
Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Failover configured_node
Failback manual
Script_Parameters:
ITEM STATUS MAX_RESTARTS RESTARTS NAME
Service up 0 0 service1
Subnet up 15.13.168.0
Resource up /example/float
Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled ftsys9 (current)
Alternate up enabled ftsys10
PACKAGE STATUS STATE AUTO_RUN NODE
Reviewing Cluster and Package Status 255