Managing Serviceguard Fifteenth Edition, reprinted May 2008

Cluster and Package Maintenance
Reviewing Cluster and Package Status
Chapter 7 337
Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled ftsys10 (current)
Alternate up enabled ftsys9
NOTE The Script_Parameters section of the PACKAGE output of cmviewcl
shows the Subnet status only for the node that the package is running
on. In a cross-subnet configuration, in which the package may be able
to fail over to a node on another subnet, that other subnet is not shown
(see “Cross-Subnet Configurations” on page 41).
Quorum Server Status If the cluster is using a quorum server for
tie-breaking services, the display shows the server name, state and
status following the entry for each node, as in the following excerpt from
the output of cmviewcl -v:
CLUSTER STATUS
example up
NODE STATUS STATE
ftsys9 up running
Quorum Server Status:
NAME STATUS STATE
lp-qs up running
...
NODE STATUS STATE
ftsys10 up running
Quorum Server Status:
NAME STATUS STATE
lp-qs up running
CVM Package Status If the cluster is using the Veritas Cluster
Volume Manager (CVM), version 3.5, for disk storage, the system
multi-node package VxVM-CVM-pkg must be running on all active nodes
for applications to be able to access CVM disk groups. The system
multi-node package is named SG-CFS-pkg if the cluster is using version
4.1 or later of the Veritas Cluster Volume Manager.