Managing Serviceguard Fifteenth Edition, reprinted May 2008

Planning and Documenting an HA Cluster
Hardware Planning
Chapter 4 141
Hardware Configuration Worksheet
The following worksheet will help you organize and record your specific
cluster hardware configuration. This worksheet is an example; blank
worksheets are in Appendix F. Make as many copies as you need.
SPU Information:
Host Name ____ftsys9___________ Series No ______rp8400____________
Memory Capacity ____128 MB _________ Number of I/O Slots ______12_______
=============================================================================
LAN Information:
Name of Name of Node IP Traffic
Subnet __Blue___ Interface ___lan0___ Addr___35.12.16.10__ Type ____HB___
Name of Name of Node IP Traffic
Subnet __Blue___ Interface ___lan2___ Addr_______________ Type _standby_
Name of Name of Node IP Traffic
Subnet __Red____ Interface ___lan1___ Addr___35.12.15.12_ Type _HB, client
=============================================================================
Disk I/O Information for Shared Disks:
Bus Type _SCSI_ Slot Number _4__ Address _16_ Disk Device File __________
Bus Type _SCSI_ Slot Number _6_ Address _24_ Disk Device File __________
Bus Type ______ Slot Number ___ Address ____ Disk Device File _________
Attach a printout of the output from the ioscan -fnC disk command
after installing disk hardware and rebooting the system. Mark this
printout to indicate which physical volume group each disk belongs to.