Managing Serviceguard 14th Edition, June 2007

Migrating from LVM to VxVM Data Storage
Migrating Volume Groups
Appendix G498
utility is described along with its limitations and cautions in the
Veritas Volume Manager Migration Guide for your version, available
from http://www.docs.hp.com. If using the vxconvert(1M) utility,
then skip the next step and go ahead to the following section.
NOTE Remember that the cluster lock disk, if used, must be configured on
an LVM volume group and physical volume. If you have a lock
volume group containing data that you wish to move to VxVM, you
can do so, but do not use vxvmconvert, because the LVM header is
still required for the lock disk.
6. Restore the data to the new VxVM disk groups. Use whatever means
are most appropriate for the way in which the data was backed up in
step 3 above.