Managing Serviceguard 14th Edition, June 2007

Planning and Documenting an HA Cluster
Hardware Planning
Chapter 4140
Hardware Configuration Worksheet
The following worksheet will help you organize and record your specific
cluster hardware configuration. This worksheet is an example; blank
worksheets are in Appendix F. Make as many copies as you need.
Complete the worksheet and keep it for future reference.
SPU Information:
Host Name ____ftsys9___________ Series No ______rp8400____________
Memory Capacity ____128 MB _________ Number of I/O Slots ______12_______
=============================================================================
LAN Information:
Name of Name of Node IP Traffic
Subnet __Blue___ Interface ___lan0___ Addr___35.12.16.10__ Type ____HB___
Name of Name of Node IP Traffic
Subnet __Blue___ Interface ___lan2___ Addr_______________ Type _standby_
Name of Name of Node IP Traffic
Subnet __Red____ Interface ___lan1___ Addr___35.12.15.12_ Type _HB, client
=============================================================================
Disk I/O Information for Shared Disks:
Bus Type _SCSI_ Slot Number _4__ Address _16_ Disk Device File __________
Bus Type _SCSI_ Slot Number _6_ Address _24_ Disk Device File __________
Bus Type ______ Slot Number ___ Address ____ Disk Device File _________
Attach a printout of the output from the ioscan -fnC disk command
after installing disk hardware and rebooting the system. Mark this
printout to indicate which physical volume group each disk belongs to.