Managing Serviceguard 13th Edition, February 2007

Troubleshooting Your Cluster
Solving Problems
Chapter 8372
The force import will clear the host name currently written on the disks
in the disk group, after which you can deport the disk group without
error so it can then be imported by a package running on a different
node.
CAUTION This force import procedure should only be used when you are certain
the disk is not currently being accessed by another node. If you force
import a disk that is already being accessed on another node, data
corruption can result.
Package Movement Errors
These errors are similar to the system administration errors except they
are caused specifically by errors in the package control script. The best
way to prevent these errors is to test your package control script before
putting your high availability application on line.
Adding a set -x statement in the second line of your control script will
cause additional details to be logged into the package log file, which can
give you more information about where your script may be failing.
Node and Network Failures
These failures cause Serviceguard to transfer control of a package to
another node. This is the normal action of Serviceguard, but you have to
be able to recognize when a transfer has taken place and decide to leave
the cluster in its current condition or to restore it to its original
condition.
Possible node failures can be caused by the following conditions:
HPMC. This is a High Priority Machine Check, a system panic
caused by a hardware error.
•TOC
•Panics
•Hangs
Power failures