Managing Serviceguard 13th Edition, February 2007

Cluster and Package Maintenance
Reviewing Cluster and Package Status
Chapter 7300
Failover and failback policies are displayed in the output of the cmviewcl
-v command.
Examples of Cluster and Package States
The following sample output from the cmviewcl -v command shows
status for the cluster in the sample configuration.
Normal Running Status Everything is running normally; both nodes
in the cluster are running, and the packages are in their primary
locations.
CLUSTER STATUS
example up
NODE STATUS STATE
ftsys9 up running
Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY up 56/36.1 lan0
STANDBY up 60/6 lan1
PACKAGE STATUS STATE AUTO_RUN NODE
pkg1 up running enabled ftsys9
Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Failover configured_node
Failback manual
Script_Parameters:
ITEM STATUS MAX_RESTARTS RESTARTS NAME
Service up 0 0 service1
Subnet up 0 0 15.13.168.0
Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled ftsys9 (current)
Alternate up enabled ftsys10
NODE STATUS STATE
ftsys10 up running
Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY up 28.1 lan0