Managing Serviceguard 13th Edition, February 2007

Configuring Packages and Their Services
Creating the Package Configuration
Chapter 6268
# out the SIGKILL signal to the service to force its termination.
# This timeout value should be large enough to allow all cleanup
# processes associated with the service to complete. If the
# SERVICE_HALT_TIMEOUT is not specified, a zero timeout will be
# assumed, meaning the cluster software will not wait at all
# before sending the SIGKILL signal to halt the service.
#
# Example: SERVICE_NAME DB_SERVICE
# SERVICE_FAIL_FAST_ENABLED NO
# SERVICE_HALT_TIMEOUT 300
#
# To configure a service, uncomment the following lines and
# fill in the values for all of the keywords.
#
#SERVICE_NAME <service name>
#SERVICE_FAIL_FAST_ENABLED <YES/NO>
#SERVICE_HALT_TIMEOUT <number of seconds>
# Enter the network subnet name that is to be monitored for this
# package. Repeat this line as necessary for additional subnet names.
# If any of the subnets defined goes down, the package will be
# switched to another node that is configured for this package and has all
# the defined subnets available.
# The subnet names could be IPv4 or IPv6. The network subnet names
# that are to be monitored for this package could be a mix of IPv4 or IPv6
# subnet names
#SUBNET
# The keywords RESOURCE_NAME, RESOURCE_POLLING_INTERVAL,
# RESOURCE_START, and RESOURCE_UP_VALUE are used to specify Package
# Resource Dependencies. To define a package Resource Dependency, a
# RESOURCE_NAME line with a fully qualified resource path name, and
# one or more RESOURCE_UP_VALUE lines are required. The
# RESOURCE_POLLING_INTERVAL and the RESOURCE_START are optional.
#
# The RESOURCE_POLLING_INTERVAL indicates how often, in seconds, the
# resource is to be monitored. It will be defaulted to 60 seconds if
# RESOURCE_POLLING_INTERVAL is not specified.
#
# The RESOURCE_START option can be set to either AUTOMATIC or DEFERRED.
# The default setting for RESOURCE_START is AUTOMATIC. If AUTOMATIC
# is specified, Serviceguard will start up resource monitoring for
# these AUTOMATIC resources automatically when the node starts up.
# If DEFERRED is selected, Serviceguard will not attempt to start
# resource monitoring for these resources during node start up. User