Managing Serviceguard 12th Edition, March 2006

Serviceguard Commands
Appendix A 403
cmstartres This command is run by packge control scripts, and
not by users!
Starts resource monitoring on the local node for an
EMS resource that is configured in a Serviceguard
package.
cmstartres starts resource monitoring for an EMS
resource on the local node. This resource must be
configured in the specified
package_name .
cmstopres This command is run by packge control scripts, and
not by users!
cmstopres stops resource monitoring for an EMS
resource on the local node. This resource must be
configured in the specified
package_name .
cmversion Returns the version of Serviceguard installed on
the system where the command is issued.
cmviewcl View information about the current high
availability cluster.
cmviewcl displays the current status information
of a cluster. Output can be displayed for the whole
cluster or it may be limited to particular nodes or
packages.
Information can be formatted in tabluated form,
which is organized for viewing, or in line format,
which is designed for scripts to easily parse.
cmviewconf View Serviceguard cluster configuration
information.
cmviewconf collects and displays the cluster
configuration information, in ASCII format, from
the binary configuration file for an existing cluster.
Optionally, the output can be written to a file. This
command can be used as a troubleshooting tool to
identify the configuration of a cluster.
Table A-1 Serviceguard Commands (Continued)
Command Description