Managing Serviceguard 12th Edition, March 2006

Cluster and Package Maintenance
Reviewing Cluster and Package Status
Chapter 7 321
pkg2 down halted disabled unowned
Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Failover configured_node
Failback manual
Script_Parameters:
ITEM STATUS NODE_NAME NAME
Resource up ftsys9 /example/float
Subnet up ftsys9 15.13.168.0
Resource up ftsys10 /example/float
Subnet up ftsys10 15.13.168.0
Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled ftsys10
Alternate up enabled ftsys9
Pkg2 now has the status “down”, and it is shown as in the unowned state,
with package switching disabled. Resource “/example/float,” which is
configured as a dependency of pkg2, is down on one node. Note that
switching is enabled for both nodes, however. This means that once
global switching is re-enabled for the package, it will attempt to start up
on the primary node.
Status After Moving the Package to Another Node After issuing
the following command:
# cmrunpkg -n ftsys9 pkg2
the output of the cmviewcl -v command is as follows:
CLUSTER STATUS
example up
NODE STATUS STATE
ftsys9 up running
Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY up 56/36.1 lan0
STANDBY up 60/6 lan1