Managing Serviceguard 12th Edition, March 2006

Configuring Packages and Their Services
Creating the Package Control Script
Chapter 6300
# (netmask=ffff:ffff:ffff:ffff::)
#
# Hint: Run “netstat -i” to see the available IPv6 subnets by looking
# at the address prefixes
# IP/Subnet address pairs for each IP address you want to add to a subnet
# interface card. Must be set in pairs, even for IP addresses on the same
# subnet.
#
#IP[0]=””
#SUBNET[0]=””
# SERVICE NAMES AND COMMANDS.
# Specify the service name, command, and restart parameters which are
# used by this package. Uncomment SERVICE_NAME[0]=””, SERVICE_CMD[0]=””,
# SERVICE_RESTART[0]=”” and fill in the name of the first service, command,
# and restart parameters. You must begin with SERVICE_NAME[0],SERVICE_CMD[0],
# and SERVICE_RESTART[0] and increment the list in sequence.
#
# For example:
# SERVICE_NAME[0]=pkg1a
# SERVICE_CMD[0]=”/usr/bin/X11/xclock -display 192.10.25.54:0”
# SERVICE_RESTART[0]=”” # Will not restart the service.
#
# SERVICE_NAME[1]=pkg1b
# SERVICE_CMD[1]=”/usr/bin/X11/xload -display 192.10.25.54:0”
# SERVICE_RESTART[1]=”-r 2” # Will restart the service twice.
#
# SERVICE_NAME[2]=pkg1c
# SERVICE_CMD[2]=”/usr/sbin/ping”
# SERVICE_RESTART[2]=”-R” # Will restart the service an infinite
# number of times.
#
# Note: No environmental variables will be passed to the command, this
# includes the PATH variable. Absolute path names are required for the
# service command definition. Default shell is /usr/bin/sh.
#
#SERVICE_NAME[0]=””
#SERVICE_CMD[0]=””
#SERVICE_RESTART[0]=””
# DEFERRED_RESOURCE NAME
# Specify the full path name of the ‘DEFERRED’ resources configured for
# this package. Uncomment DEFERRED_RESOURCE_NAME[0]=”” and fill in the
# full path name of the resource.
#
#DEFERRED_RESOURCE_NAME[0]=””