Managing Serviceguard 12th Edition, March 2006

Configuring Packages and Their Services
Creating the Package Configuration
Chapter 6278
NODE_FAIL_FAST_ENABLED NO
# Enter the complete path for the run and halt scripts. In most cases
# the run script and halt script specified here will be the same
# script,the package control script generated by the cmmakepkg command.
# This control script handles the run(ning) and halt(ing) of the
# package.
#
# Enter the timeout, specified in seconds, for the run and halt
# scripts. If the script has not completed by the specified timeout
# value, it will be terminated. The default for each script timeout
# is NO_TIMEOUT. Adjust the timeouts as necessary to permit full
# execution of each script.
#
# Note: The HALT_SCRIPT_TIMEOUT should be greater than the sum of
# all SERVICE_HALT_TIMEOUT values specified for all services.
#
# The file where the output of the scripts is logged can be specified
# via the SCRIPT_LOG_FILE parameter. If not set, script output is sent
# to a file named by appending '.log' to the script path.
#
#SCRIPT_LOG_FILE
RUN_SCRIPT
RUN_SCRIPT_TIMEOUT NO_TIMEOUT
HALT_SCRIPT
HALT_SCRIPT_TIMEOUT NO_TIMEOUT
# Enter the names of the storage groups configured for this package.
# Repeat this line as necessary for additional storage groups.
#
# Storage groups are only used with CVM disk groups. Neither
# VxVM disk groups or LVM volume groups should be listed here.
# By specifying a CVM disk group with the STORAGE_GROUP keyword
# this package will not run until the CVM system multi node package is
# running and thus the CVM shared disk groups are ready for
# activation.
#
# NOTE: Should only be used by applications provided by
# Hewlett-Packard.
#
# Example : STORAGE_GROUP dg01
# STORAGE_GROUP dg02